ProForm Pro 2500 Treadmill English Manual - Page 12
ProForm Pro 2500 Treadmill Manual
View all ProForm Pro 2500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12. With the help of a second person, hold the console assembly near the Uprights (90, 99). Connect the Upright Wire (88) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Next, connect the two pulse wires. Then, remove the wire tie from the Upright Wire (88). 12 Console Assembly Pulse Wires Pulse Bar Assembly Wire Tie 88 Console Wire 90 99 Console Wire 88 13. Insert the pulse wires and the Upright Wire (not shown) into the Handrails (92, 93) as you set the console assembly on the Handrails. Attach the console assembly with four 5/16" x 5/8" Screws (4) and four 5/16" Star Washers (12). Start all four Screws, and then tighten them. Tighten the four 3/8" x 1" Screws (6). 13 92 93 12 4 6 Console Assembly 12 4 6 12