ProForm Quick Start 5.0 Treadmill Uk Manual - Page 13

THE INFORMATION MODE The console features an information mode that allows you to select a measurement system of miles or kilometers, and to turn on and turn off the display demo mode. The information mode also keeps track of the total number of hours that the treadmill has been used and the total distance that the walking belt has moved. To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown: An "M" for metric kilometers or an "E" for English miles will appear in the display. Press the Speed increase button to change the unit of measurement if desired. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a "d" will appear in the display while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease button. Press the Display Mode button to view the total number of hours the treadmill has been used. Press the Display Mode button again to view the total number of kilometers (or miles) that the walking belt has moved. To exit the information mode, remove the key from the console. 13