ProForm Strideselect 830 Elliptical English Manual - Page 9
M8 x 45mm Button Bolts 50 and two M8 Nylon
View all ProForm Strideselect 830 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Attach two Pedal Posts (16) to the Left Pedal Arm (14) 8 with two M8 x 16mm Button Screws (84) and two M8 Washers (53). Attach the other Pedal Posts (not shown) to the 14 Right Pedal Arm (75) in the same way. 84 75 53 16 9. Attach one of the Pedals (12) to the Left Pedal Arm 9 (14) with two M4 x 16mm Screws (66). 12 Attach the other Pedal (not shown) to the Right Pedal Arm (not shown) in the same way. 14 66 66 10. Identify the Left Handlebar (9), which is marked with a sticker. Insert the Left Handlebar into one of the 10 Handlebar Legs (79); make sure that the Handlebar Leg is turned so the hexagonal holes are on the indicated side. Attach the Left Handlebar with two M8 x 45mm Button Bolts (50) and two M8 Nylon 9 Locknuts (46). Make sure that the Nylon Locknuts are inside of the hexagonal holes. Do not tighten the Button Bolts yet. Assemble the Right Handlebar (not shown) and the other Handlebar Leg (not shown) in the same way. 46 50 Hexagonal Holes 79 9