ProForm Trainer 8.0 Treadmill English Manual - Page 11
Slide the Left and Right Base Covers onto
![]() |
View all ProForm Trainer 8.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire 4 (81). Next, hold a Wheel (97) inside the Base (94), and insert a 3/8" x 1 3/4" Screw (62) through the Base and the Wheel as shown; do not fully 7 tighten the Screw yet. Insert two 3/8" x 2 1/4" Screws (7) with two 3/8" Star Washers (13) and a 3/8" x 1 1/4" 13 Screw (63) with a 3/8" Star Washer (13) into the bracket at the bottom of the Right Upright (90), and partially tighten the three Screws into the Base (94); do not fully tighten the Screws yet. Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left 94 side. 13 63 90 5. Remove and save the four 5/16" x 3/4" Screws (31). 5 89 Identify the Left and Right Base Covers (82, 83). Slide the Left and Right Base Covers onto the Left and Right Uprights (89, 90) as shown. 31 81 62 97 90 82 31 83 11
![](/manual_guide/products/proform-trainer-80-treadmill-english-manual-6802b71/11.png)