ProForm Xp 420 Razor Elliptical English Manual - Page 10

9. Identify the Left Upper Body Arm (8), which is marked with an "L" sticker. Orient the Left 9 Upper Body Arm and the left Upper Body Leg (6) as shown; make sure that the hexagonal holes in the Left Upper Body Arm are in the indicated location. Slide the Left Upper Body Arm (8) onto the left Upper Body Leg (6). Attach the Left Upper Body Arm with two M6 x 38mm Button Bolts (76) and two M6 Locknuts (77); make sure that the Locknuts are inside the hexagonal holes. Repeat this step for the Right Upper Body Arm and the right Upper Body Leg (not shown). 8 77 76 Hexagonal Holes 6 10. Apply a generous amount of the included grease to the Pivot Axle (16). Then, apply a 10 small amount of grease to two Wave Washers (88). Insert the Pivot Axle (16) into the Upright (2). Place a Wave Washer (88) on each end of the Pivot Axle. Slide the left Upper Body Leg (6) onto the Pivot Axle (16). Attach the left Upper Body Leg with an M6 x 16mm Button Screw (80) and a Large Axle Cover (20). Attach the right Upper Body Leg (6) in the same way. 2 80 20 16 6 88 88 Grease 20 80 6 10