Pyle AZPSUFM626LED Instruction Manual - Page 2

Specifications PSUFM626LED *Dual Speaker (One Active, One Passive) *6.5" Woofer And 3" Piezo Tweeter *Heavy Duty Handles For Easy Portability *Full Featured 3 Channel Mixer *Two Microphone Inputs *One 3.5mm Aux Line Input With Cable (Compatible With All Mp3 Players And Devices With Headphone Outputs) *RCA Stereo Input And Output *USB/SD Flash And Card Reader Function With Built-In FM Radio *USB Provides 5V Charge For Smart Phones And Other Devices *Display Screen Shows Number Of Songs And Play Time And FM Radio Frequency *Master Volume Controller *Ported Enclosure For Added Bass Response *35mm Speaker Stand Mount *600 Watts Peak / 300W RMS Power @4ohm *Speaker Banana Plug For Passive Speaker *Crossover Frequency: 3.5kHz *Woofer Magnet Weight: 8 Oz *Sensitivity (1W/1M): 90Db *Built In Crossover Network *Frequency Response: 20Hz-20Khz *Crossover Frequency: 3.5kHz *35mm Speaker Stand Mount *Ac 110/220v Power Switch *LED Lights *Dimensions: 19" (H) X 17.5" (W) X 12.6" (D) Safety Notes 1.Correct power must be used to operate this unit properly, do not use any other powering options, cords or methods. 2.Carfully handle, plug and unplug the power cable when handling. Hold the plug with a firm grip and when plugging or unplugging from sockets. 3.Do not open chassis! Extermely dangerous! Do not put your hands inside the chassis. If the device begins to malfunction do not attempt to repair, unplug the unit and contact Pyle immediately. 4.Don't use volatile or dangerous chemical cleaners on the unit (like toluene, alcohol, gasoline etc.) Use gentle cleaners. 5.Keep the unit in a well ventilated environment and keep away from, direct sunlight to prevent unit from overheating. 6.Prevent the unit from moisture or rain.