Pyle AZPVTTBT6BK User Manual - Page 3

Power On The Unit

Get Pyle AZPVTTBT6BK PDF manuals and user guides View all Pyle AZPVTTBT6BK manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

POWER ON THE UNIT Connect the power adaptor to an electrical outlet (120V-60Hz); Or make sure the rechargeable battery has been fully charged. Then, turn the Power/Volume Control knob clockwise to switch on the unit. The Power led light indicator will light up. PLAY A RECORD 1. Open the suitcase 2. Turn the function selection knob (4) to Phono mode 3. Place a record on the turntable (13) and set the player speed (3) to match the record speed (33/45/78). NOTE: when playing a single (a 45 rpm record) and/or records with large center holes, use the 45 rpm adaptor (1). 4. Remove the tone arm (5) from the rest position (7), push lift lever (2) backward to raise the tone arm and gently move the tone arm to the desired position over the record. The turntable will begin to spin, move the tone arm slowly onto the desired position on the record to begin playing the record. 5. If the Manual & Auto Stop control switch (6) is in ON position, record will stop automatically when finished. If this switch is in OFF position, record will not stop automatically when finished. 6. For best performance and product maintenance, unplug the turntable when not in use. PLAY BLUETOOTH 7. Turn the function selection knob (4) to BT mode. The BT light indicator will flash with Blue/Red led light. 8. Open the BT audio source and connect with "Speaker". Once connected, the BT light indicator will flash only in blue color. 9. You can control the BT audio source to select songs and volume for playback. LINE IN 10. Turn the function selection knob (4) to LINE IN mode. Connect the 3.5mm line-in jack (18) which is located at the rear of the unit with a line-in cable (not included). Plug the other end of the cable into the audio source. 11. Control the Line-in audio source to select songs and volume for playback.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
POWER ON THE UNIT
Connect the power adaptor to an electrical outlet (120V-60Hz); Or make sure the rechargeable
battery has been fully charged. Then, turn the Power/Volume Control knob clockwise to switch
on the unit. The Power led light indicator will light up.
PLAY A RECORD
1.
Open the suitcase
2.
Turn the function selection knob (4) to Phono mode
3.
Place a record on the turntable (13) and set the player speed (3) to match the record speed
(33/45/78). NOTE: when playing a single (a 45 rpm record) and/or records with large center
holes, use the 45 rpm adaptor (1).
4.
Remove the tone arm (5) from the rest position (7), push lift lever (2) backward to raise the
tone arm and gently move the tone arm to the desired position over the record. The
turntable will begin to spin, move the tone arm slowly onto the desired position on the
record to begin playing the record.
5.
If the Manual & Auto Stop control switch (6) is in ON position, record will stop automatically
when finished. If this switch is in OFF position, record will not stop automatically when
finished.
6.
For best performance and product maintenance, unplug the turntable when not in use.
PLAY BLUETOOTH
7.
Turn the function selection knob (4) to BT mode. The BT light indicator will flash with
Blue/Red led light.
8.
Open the BT audio source and connect with “Speaker”. Once connected, the BT light
indicator will flash only in blue color.
9.
You can control the BT audio source to select songs and volume for playback.
LINE IN
10.
Turn the function selection knob (4) to LINE IN mode. Connect the 3.5mm line-in jack (18)
which is located at the rear of the unit with a line-in cable (not included). Plug the other end
of the cable into the audio source.
11.
Control the Line-in audio source to select songs and volume for playback.