Pyle GDV485SL Instruction Manual - Page 8

OPERATING GUIDE LED BEHAVIOR WORKING LED: the red light is on. WIFI LED: the red light flashes when WIFI is opening; the red light is bright when WIFI is connected; the red light turns off when WIFI is OFF. CHARGING LED: the red light is bright when the battery is charging; the red light turns off when the battery is fully charged. PHOTOGRAPHY & VIDEO SETTINGS VIDEO: Select video mode. Press the OK button to start recording. When recording, the recording icon will flash. Press the OK button again to stop recording. Video Options: Normal, loop recording (2 minutes,3minutes,5minutes), time-lapse video (0.5 seconds, 1 second, 2 seconds, 5 seconds, 10 seconds, 30 seconds, 60 seconds). PICTURES: Select picture mode, the upper left corner of the screen will have a picture sign. Press the OK button to take the picture. Picture Options: Normal, delayed timing (3 seconds, 5 seconds, 10 seconds, 20 seconds), automatic (3 seconds,10 seconds,15 seconds, 20 seconds, 30 seconds), trajectory (3P/S,5P/S,10P/S,20P/S) SLOW PHOTOGRAPHY: Select slow photography mode. Press the OK button to start recording. When recording, the recording icon will flash continuously. Press the OK button to stop recording. Slow Photography Options: 1080P/60FPS, 720P/120FPS. REMOVE STORAGE AND PLAYBACK: After completing the recording, you can either use a USB data cable to transfer recorded media, or take out the Micro SD card and use a card reader to read the Micro SD card. Delete File: In the file playback screen, press the OK button for 3-5 seconds, and it will delete the selected file. 8