Pyle HUFSP98 Instruction Manual - Page 10

Change Brake 1. Firstly Loosen the 6 screws(A) , please refer to the changing deck. 2. Remove deck and loosen the screws on the brake (B). 3. Replace the brake and work back from 2 to 1. Change Steering Spring 1. Loosen the 4 screws (C) as image shown C (arrows). 2. Remove low mudguard and loosen the screws on the steering spring( D). 3. Pull the spring upwards and remove it. C 4. Tighten the screws (C) and (D) until it's completely xed. Remove or Change Collar Clamp 1. Loosen the 2 screws (E) and (F) as image shown (arrows). 2. Pull the collar clamp upwards and remove it. 3. Tighten the screws (E) and (F). Remove or Change Sliding Sleeve 1. Firstly Pull the collar clamp upwards and remove it. 2. Loosen the 2 screws (G)as shown on the picture (arrows). 3. Pull the sliding sleeve upwards and remove or replace it. B B C D C D EF G 10 www.PyleUSA.com