Pyle HURFS56 Instruction Manual - Page 11

MAINTENANCE INSTRUCTIONS Change Wheel The wheels wear down with time and can be damaged if overly used on rough surfaces. The back wheel on which the brake is applied is particularly a ected after several hours of braking. In the interests of safety, they should be checked regularly and changed if necessary. Left Wheel Turn the Allen Key counter-clockwise to loosen the screw Right Wheel Turn the Allen Key clockwise to loosen the screw Change Deck 1. Loosen the 6 screws (A) as shown on the picture (arrows). 2. Remove deck and tighten the screw (A). 3. Check for tight t after you have traveled about 5km with the new board. A A A A A A Remove or Change collar clamp 1. Loosen the 2 screws (E) and (F) as shown on the picture( arrows). 2. Pull the collar clamp upwards and remove it. 3. Tighten the screws (E) and (F). EF www.PyleUSA.com 11