Pyle HURVBTR30 User Manual - Page 4
Pyle HURVBTR30 Manual
View all Pyle HURVBTR30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
AWarning: Unauthorized dismantle,disassembly or renovation is not allowed to prevent electrical shock or any malfunctions. Please contact manufacture or local dealer immediately if there is any service work needed. Stop using the Product under the Product under below conditions, then power offand remove the plug from power supply Water or other liquid is accidentally splashed onto the Product or controller. Any accessory is found damaged or internal component is exposed Feel abnormal or severe pain during use. Power failure. Thundering or lighting weather. Plug and power cord Check if the voltage complies with the one specified for the Product. Do not retract the power plug with wet hand to prevent electric shock. Hold the plug rather than the power cord to pull out the power cord. Turn off the power switch and remove the plug from the power supply in case of electrical failure of not in use fora long time. Stop using the Product if the power cord has any damage,turn off the ower switch,pull out the plug,and contact technicians for repair. Storage and Maintenance Surface cleaning Before cleaning, ensure the power switch is turned off, and the attaching plug is pulled out of the socket The rubber pedal and covers can be cleaned with a wet cloth containing detergent, and the detergent should be removed with a cloth A Notice Do not clean the Product with corrosive detergent such as benzene or thinner, as it may cause fading, corrosion or crack on the Product. Do not splash water into the Product to avoid short circuit. Controller As wet cloth may cause malfunction of the controller, only dry cloth can be used Storage and Maintenance Make sure that the power switch is turned off and the plug is removed from the power supply Clean off the dust and dirt on the Product and keep it clean and away from places with high temperature or high humidity If the Product is not in use for a long period, a dustproof cover (buy it yourself) should be applied on the Product to prevent the entry of dust