Pyle NCCOFF87 Instruction Manual - Page 1

Pyle NCCOFF87 Manual

Page 1 highlights

CAUTION Your beverage dispenser is not made for hot beverages. Any use of hot beverages in this container may result in product malfunction, and/or serious bodily harm. Your beverage dispenser should be lled only in the place of its intended use; it should never be moved when full. Make sure the beverage dispenser is placed on a at even surface before lling with liquid. Never attempt to lift the product by lid or top. Use only crushed ice, as whole ice may damage your beverage dispenser. The beverage dispenser is to be used with cold beverages only. GETTING STARTED As with any new product, wash before rst, and after every use. Use cold water, and wash by hand. Run clean water through the spout to clean. 1. Gently insert the spout through the gasket. Make sure special attention is paid not to force the spout. It may have to be rotated clockwise to get it in. 2. The stainless steel nut should be screwed on by hand. DO NOT over or under tighten the spout. www.NutriChefKitchen.com

  • 1
  • 2

www.NutriChefKitchen.com
CAUTION
GETTING STARTED
As with any new product, wash before
first, and after every use. Use cold water,
and wash by hand.
Run clean water through the spout to
clean.
Your beverage dispenser is not made for hot beverages.
Any use of hot beverages in this container may result in product
malfunction, and/or serious bodily harm. Your beverage dispenser
should be filled only in the place of its intended use; it should never
be moved when full. Make sure the beverage dispenser is placed on
a flat even surface before filling with liquid. Never attempt to lift
the product by lid or top. Use only crushed ice, as whole ice may
damage your beverage dispenser. The beverage dispenser is to be
used with cold beverages only.
2.
The stainless steel nut should be screwed on by hand.
DO NOT
over or under tighten the spout.
1.
Gently insert the spout through the gasket.
Make sure special attention is paid not to force the
spout. It may have to be rotated clockwise to get it in.