Pyle NCFP8 Instruction Manual - Page 4

FOR MASHER & SLICER & SHREDDER These accessories are used for mashing nuts, slice and shred the carrot, potato, tomato, and any vegetables and fruit. 1. Put the spindle into bowl 2. Put the blade disc in the spindle in bowl and x well 3. Cover it in space and turn it until locked and in same level. 4. Install the bowl to unit base, turn it by clockwise and locked. 5. Plug in power, turn on the switch and put the food into feed hole. Use the food pusher to press into. Please cut the food into small piece if it is very big 6. When work nished, turn o the switch and take o the plug. Open the cover and take out blade disc, then you can get the food. 7. Masher, Slicer, shredder have the same operation. Note: Slicer and Shredder use same blade disc: one side for slicer, opposite side for shredder. FOR CHOPPER, FLOUR & EMULSOR 1. Fix the chopper blade into bowl. Note: Sharp blade, do not touch the edge of blade. 2. Cut the meat into suitable pieces and put into the bowl, and cover it. Note: Please take o the bone from the meat. 3. Install the bowl on the unit base, turn on by clockwise and lock it. 4. Plug in power and turn on the switch. Note: If the food makes the machine shake, please stop the machine and open the cover, and separate the food equality. This bowl is not use for liquid food. 5. When work nished, turn o the switch, and take o the plug, then take out the bowl from the base, open the cover and take out the blade. You can get the meat soon. 6. Chopper, Flour, Emulsor have the same operation. 4 www.NutriChefKitchen.com