Pyle PADH879 PADH879 Manual 1 - Page 3

Connections, Amplifier Requirements - speakers

Get Pyle PADH879 PDF manuals and user guides View all Pyle PADH879 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

There is a flush mounted 35mm speaker stand adapter on the bottom side of the cabinet. Connections Your PADH series speaker has an extremely flexible connection panel. There are two Speakon jacks as well as two ¼" jacks. You can also hookup your speaker cabinet using the "Quick Connect" speaker terminals, which accommodate either wire leads or a banana plug. The jacks are wired in parallel, which allows you to daisy chain additional speakers. Thus you can use one amplifier channel to power multiple speakers. Make certain that the wires you are using are at least 12 gauge unshielded speaker cable (the lower the number, the thicker the wire). Do not use shielded "instrument" cables. Hooking speakers up in parallel decreases the overall impedance, placing a greater load on the amplifier. Check your amplifier's specifications to ensure that you are not overloading the channel. CAUTION: DO NOT US E MORE THAN ONE JACK AS AN AMPLIFIER INPUT. DOING S O WILL DAMAGE THE S PEAKER! Amplifier Requirements Check the product specifications (page 5) to see the power handling for your model. There are a couple of considerations to keep in mind when 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
°°°±²³´µ¶·¸¹º±»º¼
3
There is a flush mounted 35mm speaker stand
adapter on the bottom side of the cabinet.
Connections
Your PADH series
speaker has an extremely
flexible connection panel.
There are two Speakon jacks
as well as two ¼” jacks. You
can also hookup your speaker
cabinet using the “Quick
Connect” speaker terminals,
which accommodate either
wire leads or a banana plug.
The jacks are wired in
parallel, which allows you to
daisy chain additional
speakers. Thus you can use one amplifier channel to power multiple
speakers.
Make certain that the wires you are using are at least 12 gauge
unshielded speaker cable (the lower the number, the thicker the wire). Do
not use shielded “instrument” cables.
Hooking speakers up in parallel decreases the overall
impedance, placing a greater load on the amplifier. Check your
amplifier’s specifications to ensure that you are not overloading
the channel.
CAUTION: DO NOT
USE MORE THAN ONE JACK AS AN
AMPLIFIER INPUT. DOING S O WILL DAMAGE THE S PEAKER!
Amplifier Requirements
Check the product specifications (page 5) to see the power handling
for your model. There are a couple of considerations to keep in mind when