Pyle PATVR14 User Manual - Page 12

OPERATION 10) Playback in RPT When playing video/audio content, press the RPT button to select RPTONE/RPT DIR/RPT ALL. RPTONE: Repeat the same file. RPT DIR: Repeat all the file of the folder. RPT ALL: Repeat all file of the USB. The AV INPUT jacks is on the back side. When you connect an audio/video signal through the AV input. Press MODE button or you can choose from the main menu to select AV in mode. The main menu of the AV IN mode: 11) Playback in Image mode When displaying the root menu, Press the direction buttons to select your desired FOLDER, then press the ENT or button to open the FOLDER, or play the selected file. When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file. During IMAGE playback, press one of the / buttons to change the angle of viewing picture that is displaying as follows: : 90 degree cw; :90 degree ccw; During IMAGE playback, press the button to Pause playing, Press button return to the folder. *During IMAGE playback, the following buttons are not available: RDM, INT.  AV IN OPERATION Switching to AV IN mode  OTHER FUNCTION 1. Equalization Repeatedly press EQ button on the remote control to select the equalization mode. There are four kinds of mode as below: CLASSICROCKJAZZPOPEQ OFF 2. MUTE Press MUTE button to mute the audio output. Press it again to recover output. 3. LOUD Press and hold LOUD button on the remote control to turn on/off the LOUD function. 4. SEL menu Repeatedly press SEL button on the remote control will show the SEL menu as below: Bass---Treble---Balance---Fader---EQ---Loud ---Brightness---Contrast---Hue---Saturation--Sharpness---Vol In every item you can use / / / button 12