Pyle PBMSPG198 Instruction Manual - Page 2
Front Panel Functions, Built-in 4.0 Bt Function, Function, Charging, The Speaker, Connections,
View all Pyle PBMSPG198 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
CHARGING THE SPEAKER When charging, connect a matched power adapter to AC100V- AC240V. Charging time is approximately 6 to 10 hours. Once fully charged unplug the power supply as leaving a full battery on charge for a long time may cause damage to the battery. Battery Charge Indicator: LED panel has battery status indicator. In the middle of the shape ofthe battery have three horizontal lines, each horizontal line represents 33% of electricity remaining. When no horizontal line in the shape ofthe battery or the shape ashes, please power o and promptly charge to avoid damage to the battery. There is a battery charging indicator light on the front panel. When charging,the red light will be on. When it's fully charged, the indicator light will turn into green. Warning: If the battery is under voltage, please fully charge it within 48 hours. If the speaker has to be left unused for a long time, please let the battery fully charged, otherwise it will cause damage to the battery. In the process of playing, keep unit away from high temperature environments, high magnetic elds and high frequencies. CONNECTIONS SCAN REMOTE CONTROL 1. POWER OFF ONLY 2. CHOOSE SIGNAL INPUT 3. INCREASE MUSIC VOLUME 4. MENU 5. PREVIOUS LED MODE 6. DECREASE MUSIC VOLUME 7. NEXT LED MODE 8. MUTE 9. REPEAT 10. PLAY / PAUSE KEY 11. PREVIOUS SONG / CHANNEL 12. NEXT SONG / CHANNEL 1. Under normal circumstances,the remote control should aimed directly at the receiving window of the remote control within about 4 meters and with in a 30° angle. 2. When operating the remote control, aim the remote control at the receiving window. Ensure that there are no obstacles between the remote control and the unit. 3. If the remote receiver is in a position to directly receive glare, it may fail. In this case, move the speaker away to avoid direct sunlight. 4. Avoid mixing old and new batteries. Replace the remote control batteries regularly. FRONT PANEL FUNCTIONS 1. Short press to power ON the unit, short press for input selection (Line / FM / Bluetooth / USB); Long press to power o the unit. 2. Treble / Bass / Mic volume / Mic echo volume / Guitar volume / LED mode / Music volume selection When in USB / Bluetooth mode, long press to play / pause the music; When in FM mode, long press to scan FM channel automatically. 3. Wired Mic Slot. 4. Guitar Slot 5. Reset 6. Adjust Music volume, Mic volume, Mic echo volume, LED mode. 7. Short press to select previous song on USB mode. On FM mode, short press to adjust FM-0.1. Press and hold for 5 seconds to select next channel. 8. Short press to select next song on USB mode. On FM mode, short press to adjust FM+0.1, press and hold for 5 seconds to select next channel. 9. USB Slot 10. Line IN- Connect with personal computer, mobile phone, DVD, VCD, CD, LD, Mp3, radio, electronic piano and any device that has audio output in AUX mode. On FM mode, connect the audio cable to improve radio signal. 11. Battery Indicator. Red light-charging; Green light-full. 12. DC 13.5V charging interface. BUILT-IN 4.0 BT FUNCTION • Press "POWER / INPUT" button to choose the input signal source as BT channel when starting the machine. • Please ensure the BT devices you want to connect is open. Then scan and connect the speaker with the device. When the connection is succesful, "tick" tone will prompt. If the speaker can't be connected, please restart the speaker or the device and try again. • After the mobile phone and the BT are successfully connected, you can play music. To ensure continuous stability of the music signal, try to keep the BT and the mobile phone facing one another. • This unit supports iPad, iPhone, Samsung, HTC, MOTOROLA, Nokia and other BT mobile devices wirelessly transmitting audio. • The BT of the unit can be used up to 10 meters if there are no barriers. FM FUNCTION • Press "POWER / INPUT" button to switch to FM radio. • Press and hold "MENU / " for 5 seconds for automatic searching and saving. • Short press " " and " " to select FM station manually. • Press and hold " " and " " for 5 seconds to select the last or next channel directly. "On FM mode,connect the FM antenna to improve radio signal"