Pyle PBMSPG1BK Instruction Manual - Page 4

TWS Function: 1. Turn ON two identical speakers you want to pair, please be noted that they must have the same BT paring name, both under BT mode. You only need to set up one of the two units; 2. Press and hold "PLAY/PAUSE" button for around 4 seconds, speaker will make a tone "di" to start pairing, and will make "di" voice for 3 times once successfully paired; 3. Connect Wireless BT with your mobile phone to play music by the two paired Speakers to create more powerful surround sound e ect. 4. If you want to exit the TWS mode, press and hold "TWS" button (of the unit that you set at beginning) again to exit the TWS function. Remark: You can connect the TWS function through either Wireless BT or AUX, but if you connect your mobile phone via the provided audio cable, you can not switch to Wireless BT mode by pressing the Mode button. AUX-IN: For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device's "Line Out" to the "Aux In" of this device. You would hear "Aux input mode" tone once the cord is inserted. When using an external device, all functions can be controlled by the external device except pause. Remarks: 1. To turn the unit ON, press and hold the Power button for 3 seconds; 2. Press the MODE button to switch for di erent modes, the order is Wireless BT, USB disk, Micro SD, FM radio and AUX-IN. 3. Default volume is at 50% status of max volume; 4. Turn the power button to "o " if not in use. 4 www.PyleUSA.com