Pyle PCA3 PCA3 Manual 1 - Page 5
Connecting two, ohm speakers in stereo mode.
 |
View all Pyle PCA3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connecting two 4-8 ohm speakers in stereo mode. Connecting four 8 ohm speakers in stereo mode. Ya.ToOQE FUIE E@l �' @ TROUBLE SHOOTING No power No sound The fuse might be blown. Sound source or speakers not connected properly. Check the amplifier's fuse and replace it if necessary. Check all connections. MASTER volume control set to minimum. The speaker's wire might be the wrong impedance. Adjust the volume control to desired setting. Make sure all connected speakers have the same impedance rating. The amplifier might has shut down. Turn the amplifier off and let it cool. Make sure the amplifier is properly ventilated, and then turn it back on. 3
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
Connecting two
4-³
ohm speakers in stereo mode.
Connecting four
³
ohm speakers in stereo mode.
TROUBLE SHOOTING
No power
No sound
The fuse might be blown.
Sound source or speakers
not connected properly.
MASTER volume control set
to minimum.
The speaker's wire might be
the wrong impedance.
The
amplifier
might
has
shut down.
3
°±
²³
@
�
°
'
@
Check the amplifier's fuse
and replace it if necessary.
Check all connections.
Adjust the volume control
to desired setting.
Make
sure
all
connected
speakers
have
the
same
impedance rating.
Turn the amplifier o³´ and
let it cool. Make sure the
amplifier
is
properly
ventilated, and then turn it
back on.