Pyle PCASRSD17 User Manual - Page 5

If you want to switch back to manual mode from auto mode, stop recording(or playback) to standby mode (blue indicator keeps on), long press button 3~5 seconds, till you see the indicator from blue to green, or simply power o PCASRSD17, then power on again, it will load at default----manually mode . 3. Use AUX port, you can also record music from other sources with an 3.5mm audio cable (such as: radio, MD players, anything with audio line out) 4. Known problems in Auto mode: Due to the auto function is based detecting the level of music: when the level is lower than the setting in rmware, PCASRSD17 will take it as space between two songs, so there will be chance to meet following situations: 1. If there is a long pause in a song, PCASRSD17 may take it as two songs, and save 2 les for it. 2. If the space between two songs is too short which PCASRSD17 cannot detect, PCASRSD17 will take them as one song, and save the two songs in one le. When you come across this situation, you can use the Audacity software to editing them.( nd the link following) Note: We do not suggest to power o (unplug the power supply) or unplug the USB ash during recording, even we make a design that the device will automatically save the MP3 le for previously recording when power o or USB ash unplugged during recording. If you want to edit your recorded MP3 les, you can use free software --Audacity, download from: http://audacity.sourceforge.net 5. Playback This device has playback function so you can check and listen to the recorded le. At standby mode, press playback button, device will start to play the recorded music the indicator will be slow ashing. Press playback button again, will stop playback and back to standby mode. 4 www.PyleUSA.com