Pyle PCM60A PCM60A Manual 1 - Page 8

Specifications Input Impedance AUX 1/AUX 2/AUX 3...........200mV/50k-Ohm, Unbalanced MIC 1/MIC 2/MIC 3 1.0mV/600-Ohm, Balanced TEL/PAGE 100mV/600-Ohm, Balanced Max Output Power 100 Watts x 1 THD at rated output power 1% or less at 1 kHz Frequency Response +/- 3 dB 50 Hz to 15 kHz Signal to Noise Ratio A-Weighted MIC 60dB AUX 70dB TEL 60dB Speaker Outputs 4-Ohm, 8-Ohm, 16-Ohm, 25V, and 70V line outputs AUX Output 600-Ohm 1V Monitor (MOH) Output............600-Ohm 1V (head phones) and 8-Ohm 1W (speaker) Attenuation Level (AUX 1/AUX 2/AUX 3/MIC 2/MIC 3)...40dB Tone Controls Treble 10dB, 10 kHz Bass 10dB, 100 Hz Power Requirement............120V AC 60Hz/230V AC 50Hz Power Fuse T 2.5AL 250V for 110-120V and T 1.2AL 250V for 220-240V Dimensions, inches (mm) WxHxD.......16.93 x 3.46 x 10.51 (430 x 88 x 267) Weight, lbs (kg 14.88(6.75) Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice. Your Pyle Home Amplifier is an example of superior design and 7 - Pyle Home PCM60A Manual