Pyle PDIC80 PDIC60 Manual 1 - Page 5
Ceiling, Speakers
View all Pyle PDIC80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
EXISTING CONSTRUCTION IN-CEILING SPEAKERS ye' Tor, p0,8 Cut the drywall. Note:Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place. Connect the speaker wires to the speaker. Place the frame assembly in the wall. Swivel tweeter 13 Strips of adhesive Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grille. The in-celing speakers feature unique swivel mounts for the tweeters that enable you to aim the very directional high frequencies toward the listening position, at ear-level height. Before installing the speaker grille, gently press on the outer edge of the tweeter mount to adjust the position of the tweeter. The tweeter will not swivel more than 15 degrees in any direction; do not attempt to force it to move further. Replace the metal grille. Just for PDIC60/PDIC80 After installing the speaker grille, gently press on the mesh of the tweeter to adjust the position of the tweeter. 5