Pyle PDJLT88 Instruction Manual - Page 2

Please read these instructions carefully, which includes important information about the installation, usage and maintenance of this product. SAFETY INSTRUCTION • To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture • Do not spill water or other liquids into or on to your unit. • Be sure that the local power outlet match that of the required volt-age for your unit. • Do not attempt to operate this unit if the power cord has been frayed or broken. Disconnect from main power before making any type of connection. • Do not remove the cover under any conditions. • Never operate this unit when it's cover is removed. • Never plug this unit in to a dimmer pack • Always be sure to mount this unit in an area that will allow proper ventilation. • Do not attempt to operate this unit, if it becomes damaged. • During long periods of non-use, disconnect the unit's main power. • Always mount this unit in safe and stable matter. • Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from the unit. • Heat- The appliance should be situated away from heat sources, such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. • The xture should be serviced by quali ed service personnel when: a. The power-supply cord or the plug has been damaged. b. Objects have fallen, or liquid has been spilled into the appliance. c. The appliance has been exposed to rain or water. d. The appliance does not appear to operate normally or exhibits a marked change in performance. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufacturers warranty. In the unlikely event your unit may require service please contact us. Cleaning Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light output. 1. Use normal glass cleaner and a soft cloth to wipe down the outside casing. 2. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew). www.PyleUSA.com