Pyle PFA540BT Instruction Manual - Page 3
Important Safety Information, CAUTION - manual
View all Pyle PFA540BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Important Safety Information OWNER'S RECORD The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below.Refer to themwhenever you call upon your PyleUSA regarding this product. Model no. Serial no. FOR CUSTOMERS This symbol is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure, it may be of su cient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE This symbol is intended to THE RISK OF ELECTRIC alert the user to the SHOCK. DO NOT REMOVE presence of important COVER (OR BACK). REFER operating and maintenance SERVICING TO QUALIFIED (servicing) instructions in SERVICE PERSONNEL. the literature accompanying the appliance. CAUTION You are cautioned that changes or modi cations not expressly approved in this manual could void your authority to operate this equipment. • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • To prevent fire, do not cover the ventilation of the apparatus withnewspapers, table-cloths, curtains and etc. Do not place lighted candles on the apparatus. • To prevent fire or shock hazard, do not place objects filled with liquid, such as vases, on the apparatus. • Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. • Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. • Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunlight or re. Note to Soundbar Installer: This reminder is provided to call Soundbar installers' attention to Article 820-40 of the NEC that provides guidelines for proper grounding, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as possible. www.PyleUSA.com 1