Pyle PHBT98PBK PHBT98PBK Manual 1 - Page 6

Operation Instructions How to Open the System When the "POWER" in the back panel is on, "WELCOME" will appear on the LCD, when it disappears, it suggests the system has opened. How to Play Stereo Audio Press the " " key on the remote control to choose the input mode "iPod, AUX, FM". How to Use Sleep Mode Sleep mode lets you sleep to your system at the selected time. 1. Press " " to select an amount of time before the system shuts off: 5, 15, 30 minutes, Sleep on or Sleep off. 2. Wake up the system by pressing any key when the system in the sleep mode. (1) Operations of the Remote Control Multi-function Control Area 1. " ": Select the following four submenu: , , , . Or enter to the next menu. 2. " ": Return to the previous menu. 3. " ": Adjust settings. For example: a. When you want to set the time, press the " " key and scroll to the menu by press " ", followed by the " " key to enter time setting mode. Press " " to reset the figures of hours, then press the " " key to set the minutes, after reset it, press " " key again, the time on the screen will flicker continuously to confirm successful time setup. b. When you want to change the tone settings, scroll to the menu and press " " to enter the "tone menu". Press the " " key to scroll through the three options: , , . If you want to adjust the , press " " to enter the "SW menu", press " " to adjust the volume. c. When you want to set the alarm sound module, scroll to the menu and press " " to enter the "source menu". Press the " "key to scroll through the two options: , . If you want to choose , press " " then the LCD flicker, it suggest this function has finished. The other two options have the same operation. d. When you want to set the alarm, press the " " key and scroll to the menu by press " ", followed by the " " key to enter alarm setting mode. Then Press " " to adjust the hours, then press " " key to toggle to the minutes setting. Press " " key after adjusting the minutes setting, the time on the screen will flicker momentarily to confirm successful alarm setup. After setting alarm, press the" " key to turn the alarm on. When alarm is on, the " " logo will flash all the time, then you can press the" "; " " or " " key to turn off the alarm. If you choose alarm sound module, the system will turn to FM input mode; if you