Pyle PHST92IBGL PHST92IBK Manual 1 - Page 8

Pyle PHST92IBGL Manual

Page 8 highlights

How to Setup Clock and Alarm by Touch Key Control System Touch " " enter to the first level subpage, then touch " , " to choose , and touch" " enter the options interface of ,,,, which is the second level subpage. Then, choose the icon, touch " " to enter the third-level subpage. At this moment, you can touch" , " to adjust the figures of hour or minute. After adjustment, touch " " again, the clock icon on the LCD will flicker continuously to show the success of time setup. When setup alarm, choose option on the second-level subpage, the operation is similar to the setup. After finish the setup, touch " " key to return the second-level subpage, choose icon, touch " " to turn on or off alarm. How to Play FM Tuner by Touch Key Control System When you select the FM input mode, Touch " " enter to the first level subpage, then touch " , " to choose , and touch" " enter the options interface of ,,, which is the second level subpage. Then, choose the icon, touch " " to enter the third-level subpage. " to down or to up and the tuner will search manually; choose At this moment, you can touch " , and enter status, and then touch " , " to down or to up once (to up, the FM frequency will decrease, otherwise opposite), the tuner will search automatically. If you need to stop the automatic search, pls touch " ". When you want to save the program, just enter the status, then touch " , " to choose the channel you want to save. At last, touch " " once again. Installing Battery in the Remote Control Notes about the Remote Control Trouble Shooting Problem The system has no power. Possible Reasons/solutions The plug is not inserted properly. The socket has no power. The fuse is broken. "POWER" button has not been pressed. Incorrect selection of input signal. If mute state is turned on. Sound source machine is not powered. The signal plug is connected incorrectly or lines are short-circuited. It may be effected by exterior strong disturbance, turn off first and then turn on again. Avoid direct sunlight/heat. No sound at all. Either of the main channels has no sound. LCD screen displays abnormally.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

How to Setup Clock and Alarm by Touch Key Control System
Touch
enter to the first level subpage, then touch
to enter the third-level subpage. At this moment, you can
touch
to adjust the figures of hour or minute. After adjustment, touch
again, the clock
icon on the LCD will flicker continuously to show the success of time setup.
"
"
"
,
" to choose <clock>, and touch"
"
enter the options interface of <time>,<alarm>,<source>,<A.on/off>, which is the second level subpage.
Then, choose the <time> icon, touch "
"
"
,
"
"
"
When setup alarm, choose <alarm> option on the second-level subpage, the operation is similar to
the <time> setup. After finish the <alarm> setup, touch
touch
"
" key to return the second-level subpage,
choose <A.on/off> icon,
"
" to turn on or off alarm.
How to Play FM Tuner by Touch Key Control System
When you select the FM input mode, Touch
enter to the first level subpage, then touch
to enter the third-level subpage.
At this moment, you can touch
to down or to up and the tuner will search manually; choose
and enter <auto> status, and then touch
to down or to up once (to up, the FM frequency
will decrease, otherwise opposite), the tuner will search automatically. If you need to stop the automatic
search, pls touch
"
"
"
,
"
to choose <tuner>, and touch"
" enter the options interface of <adjust>,<auto>,<store>, which is
the second level subpage. Then, choose the <adjust> icon, touch "
"
"
,
"
"
,
"
"
". When you want to save the program, just enter the <store> status, then touch
"
,
" to choose the channel you want to save. At last, touch "
" once again.
Installing Battery in the Remote Control
Problem
Possible Reasons/solutions
The system has no power.
No sound at all.
Either of the main channels has
no sound.
LCD screen displays abnormally.
The plug is not inserted properly.
The socket has no power.
The fuse is broken.
POWER button has not been pressed.
"
"
Incorrect selection of input signal.
If mute state is turned on.
Sound source machine is not powered.
The signal plug is connected incorrectly or
lines are short-circuited.
It may be effected by exterior strong disturbance,
turn off first and then turn on again.
Avoid direct sunlight/heat.
Notes about the Remote Control
Trouble Shooting