Pyle PHYELANT14 User Manual - Page 12

Trouble Shooting Q: Unit doesn't power up A: Use a multi-meter to check for 12v+ to red and yellow wires. Check for proper Ground on the Black wire. Q: My video does not play A: Attach "PARK" wire to parking break. When this wire is grounded the video will play (Grounding trigger of the parking brake) Q: Reverse camera does not come up on the screen A: Attach "BACK UP CAMERA" wire to reverse tail light 12v+ (Make sure camera is and sending video signal) Q: Can I set up steering wheel control? A: Key 1 and Key 2 wires need to be wired to your vehicle's steering wheel column Q: The time I set is not saved after device reboot A: Are other setting saved? If not: Check that yellow memory wire is attached to 12v+ constant A: turn off GPS auto update -Go to radio settings > Set Time > switch off auto update Q: My GPS gets no reception. A: Check antenna is connected properly A: Mount Antenna directly to your vehicle (GPS antenna is to be magnetically mounted, it will boost GPS reception when attached) A: Check alternate antenna placement to test for interference Q: How do I turn up GPS instruction volume (I Can't hear it over music) A: Change GPS sound settings Go to Navi > Settings > Sounds > Set GPS voice level to max > Set radio volume to min (Adjust accordingly) Q: How do I update my map card. A: The radio will notify you when a map update becomes available. We will need to send out a new map card from our parts department. Log onto www.PyleUSA.com and open a parts ticket under "contact us" requesting the map update. Q: Where can I download irmware updates? A: www.pyleaudio.com, www.pyleusa.com Q: How to I set the time? A: System setting, set time 11 PyleUSA.com