Pyle PKTWC36SL Instruction Manual - Page 3

Circuit Diagram

Page 3 highlights

CIRCUIT DIAGRAM L E electric heating pipe overheat protector N hand-reset cold switch hot switch heating thermostat refrigeration self-reset components red green Attentions 1. Put the unit on the stable at surface in the cool dry room, escape from direct sunshine. Keep the unit at least 20 cm away from the wall and no easy-burned articles near the dispenser. The unit is not t for using at outdoor or the place with water spray. 2. Moving models with compressor can't be put up and down or slope to 45° for avoiding destruction or accident happening. 3. Pull out the plug and drain out the rest water if its not going to be used for a long time. When the electric parts is working under 0 degree and cause ice jam, close cooling switch for 4 hours and then it can be opened for continuous working. 4. Do not start and stop the unit by inserting or pulling out the plug. Don't lengthen the power cord to avoid re. 5. For avoiding dry operation to destroy the parts, please push the hot water faucet till the water ow out, then start the power and connect the heating switch. www.NutriChefKitchen.com www.NutriChefKitchen.com 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

L
E
N
cold switch
refrigeration
components
green
red
hot switch
heating thermostat
self-reset
electric heating pipe
overheat protector
hand-reset
www.NutriChefKitchen.com
CIRCUIT DIAGRAM
Attentions
1. Put the unit on the stable flat surface in
the cool dry room, escape from direct
sunshine. Keep the unit at least 20 cm
away from the wall and no easy-burned
articles near the dispenser. The unit is not
fit for using at outdoor or the place with
water spray.
2. Moving models with compressor can’t
be put up and down or slope to 45°
for
avoiding destruction or accident happening.
3. Pull out the plug and drain out the rest water
if its not going to be used for a long time.
When the electric parts is working under
0 degree and cause ice jam, close cooling
switch for 4 hours and then it can be opened
for continuous working.
4. Do not start and stop the unit by inserting or
pulling out the plug. Don’t lengthen the
power cord to avoid fire.
5. For avoiding dry operation to destroy the
parts, please push the hot water faucet till
the water flow out, then start the power
and connect the heating switch.
www.NutriChefKitchen.com
3