Pyle PLCMTR92 Instruction Manual - Page 5

PLCMTR - Commercial Grade Camera System 1. Set the mount stand in the desired location, then use screws to secure the mount stand into location. Please make sure as to set a location free from vehicle obstruction including any wiring, or location where it may obstruct the driver's view, driving conditions, etc. 2. Attach the metal buckle piece on top of the fan shaped mount stand, and slide it into the receiving slot in back of the display monitor assembly. This metal buckle should slide in and up to the monitor assembly. 3. Set the desired position/height of the buckle into the monitor assembly. 4. Tighten the clamp-style knob in the back of the stand mount to secure the monitor in the desired position. 5. The angle / tilt position of the stand mount is also adjustable. Located toward the base of the stand mount is another clamp-style knob. *Be sure to mount the video monitor from speakers or other devices which may distort the output display. Keep the monitor away from the speaker's or other device's magnetic field. *Install the monitor on a surface that can bear the capacity of over 9 lbs. *Don't install the monitor in the line of ventilation areas (keep away from extreme hot and extreme cold temperatures). *The monitor is not waterproof, avoid exposure to excess liquids or harsh cleaning chemicals/detergents. *Holes in the back of the display monitor serve as ventilation ducts. To ensure operation of the unit, and protect from overheating, these holes must not be blocked, to reduce risk of electric shock or fire. Model: PLCMTR92 Weatherproof Rearview Backup Camera & Monitor Video System, Commercial Grade, 9" Monitor, Dual DC 12-24V for Bus, Truck, Trailer, Van Commercial Grade Camera & Monitor Video System Includes All Necessary Cables & Wiring Reverse Image (Backup Camera) Ability Used for Parking, Docking, Driving Safety Monitor: 9" TFT/LCD Active Matrix Video Monitor Aspect Ratio: 16:9 Widescreen Format PAL/NTSC Video Format Compatible 4-Pin Video Connector Resolution: 800 x 480 Universal Stand & Anti-Glare Sun Visor Designed for Car/Truck use 12 & 24 Volt Systems DC Reverse 12-24 Volt Trigger with Auto Activation feature OSD Menu Control - Contrast, Brightness, Color Monitor Dimensions (W x H x D): 8.86" x 5.71" x 1.89" What's in the Box: Camera, LCD Monitor Universal Stand/Mount 4-Pin 50' Foot (15 Meter) Connection Cable Power & Wiring Harness Remote Control Includes (1) Universally Mountable Camera Weatherproof Rearview Camera System Marine Grade Construction, IP68 Rating Built-in Night Vision Illumination LEDs Low Lux Light Performance Min. Illumination: 0.2Lux Image sensor: Color CMD Effective Pixels: 580 x 540 Resolution: 420 Lines Lens Angle: 170 Degree Auto Image Adjustment Video Output LOV pp-75 Ohm Designed for Car/Truck use with 12 & 24 Volt Systems Camera Dimensions (W x H x D): 3.18" x 2.95" x 2.17" 5 www.PyleUSA.com