Pyle PLD70BT PLD70BT Manual 1 - Page 13

Remote Control Ref # Button Function 23 ENTER This button is used to confirm selections and settings within many of the menus in the OSD system. 24 0-9 Use to input numerical values during programming, with the GOTO button, or to directly select a track to play . In addition, in Radio Mode (when RDS is engaged), 0 serves as the TA button and 9 serves as the AF button. This button is used with the other number buttons for use with 25 +10/ two-digit number entries. In Bluetooth menu, it serves as the hash button on your mobile handset. 26 1-6 Six numbered preset buttons store and recall stations for each band Preparing the Remote Control Inserting the Battery 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ). Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal receiver). Operation angle: About 30 degree in each the direction of the front of the IR mark. Note : The lithium cell in the battery compartment of remote control has been secured for transport with a foil . Before initial use please remove this foil so that the remote control is ready for operation . -12-