Pyle PLDNV695 PLDNV695 Manual 1 - Page 15

Phenomenon Not operating Reasons Fuse of machine power supply and auto vehicle battery is burnt; Voltage of power supply is overloaded; Automatic protection system avoids fault Solutions Change for fuse of the correct types; Adjust voltage; Reset the system by pressing due to illegal operation No or low sound Disconncetion; Volume setting is low volume; Loudspeaker fault Big deviation of volume balance setting; Earthing in loudspeaker conection Remote control doesn't work Inferior quality of sound; Distortion of Battery is out of power; Battery is not placed correctly Inferior disc is prohibited; Loudspeaker does not match impedance of the machine Speaker fault sound the Reset key Check the connection; increase volume Adjust the volume balance setting to middle place; Keep insulation of loudspeaker connection Change new battery; Reinstall battery; Use genuine discs; Change a matched loudspeaker; Check the connection of loudspeaker. Machine reset Connection of ACC and B+ is not correct. Check and reconnect ACC and by itself when it B+ is shut down No image Connection of brake wire is not correct; Not braking state. Check brake wire and connect them corerectly; Keep braking state after the car Unstable output of image DVD does not correspond with the present system video setting; Video signal line is not connected correctly. is placed safely. Adjust systerm video setting; Check and replace video signal line. Image Incorrect ratio settings of icons Use correct ratio settings of stretching or icons compressing Weak signal Auto antenna does not reach out completely LOC function is under working state. Connect auto antenna line correctly Close LCC function Adverse antenna grounding;antenna is