Pyle PLMRC400X4 Instruction Manual - Page 2

INTRODUCTION This power ampli er has been designed to provide high quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the product and it's features. Before installing the power ampli er please read this instruction manual carefully. The instructions for mounting and connecting the set have to be followed precisely. If necessary, a service center should be consulted. All connections for DC power, signal input and speaker outputs can be carried out easily and safely byway of RCA and screwed terminals. INSTALLATION INSTRUCTIONS Please choose a mounting place without any direct weather in uences. Note that the ampli er generates heat so that a well ventilated place is necessary. According to your car's construction the set can be made very carefully in order to ensure the ampli er's full performance and reliability. Keep the wire connections as short as possible with su cient dimensions in order to minimize power losses and provide a higher audio output of the system. For safety reasons route all power and speaker wiring by using the exiting wire channels. To minimize damage to the cables, take care that they do not pass sharp edged metal. Lay all cables as far away as possible from the ignition cables, modules in the boot and under the key dashboard, as this create interference. Add a fuse into the (+) power cable in a distance of not more than 30 cm from the positive battery pole. Keep the length of the power wires as short as possible. It is better to use power cables which are short and then longer speaker cables. In order to reduce interference, also pay attention to the instructions. 2 www.PyleUSA.com