Pyle PLRVST400 User Manual - Page 10

OPERATION TRUN ON/OFF THE UNIT Press PWR button (1) to turn on the unit. When the unit is on. Press and hold PWR button (1) for 2 seconds to turn the unit off. SOUND ADJUSTMENT Press SEL button (1) shortly to select the desired adjustment mode. The adjustment mode will change in the following order: BAS



TRE



LOUD



EQ



LOC



ST



VOL



MCU version



DVD version BAS: bass TRE: treble BAL: balance LOUD: Loudness EQ: equalization LOC: local STEREO: stereo VOL: volume In each item, by rotating the audio knob (1) it is possible to adjust the desired sound quality. LOUDNESS In LOUD item rotating the audio knob (1) to turn the LOUDNESS function on/off. EQ FUNCTION In EQ item you can select the preset EQ mode by rotating the audio knob (1) as below. FLAT - POP - ROCK - CLASS - EQ OFF LOC ON/OFF In LOC item rotating the audio knob (1) to turn on/off local function. In LOC ON mode the unit will reduce the receiving sensitivity when you search station. That means you can receive the station that sounds good. It will ignore the station that sound is not good. In LOC OFF mode it will increase the receiving sensitivity when you search the station. That means you can receive more stations. STEREO/MONO FUNCTION In STEREO item rotating the audio knob (1) to choose STEREO or MONO mode. In STEREO mode you can receive FM stereo signal. In MONO mode the stereo station will be switched to monochrome. Sometimes when the signal is not good. Changing it to MONO mode will reduce the noise. LIQUID CRYSTAL DISPLAY (LCD) The liquid crystal display (lcd) displays the frequency, time and activated functions. ALARM ON/OFF Press ALARM ON/OFF button (5) to turn on/off alarm function. SEEING ALARM TIME Short press ALARM SET button (4) to see the alarm time. SETTING THE ALARM To set the alarm, press and hold the ALARM SET button (4) for 2 seconds. The number representing the hours will ash. Rotating the VOL control (1) to adjust the hour. Press ALARM SET again brie y and the number representing the minutes will ash. Rotating the VOL control (1) to adjust the minutes. Press the ALARM SET button (4) again to store the alarm time. Once a time is set, press ALARM ON/OFF (5) to turn the alarm function on or off. STOP THE ALARM OUTPUT When time ran to the alarm time. The head unit will output the alarm sound. Pressing ALARM ON/OFF button(5) to stop the alarm output. 7 www.PyleUSA.com