Pyle PLTS76DU User Manual - Page 18

Basic Operation Setting Audio Mode In any modes, touch the "EQ" range on the touch screen (or press the EQ button on remote control) to select one of the preset sound modes: ROCK/POP/ JAZZ/CLASSIC/USER . EX.: In RADIO mode 87.50 FM1 MHZ DX ST USER 1 88.50 2 90.00 3 98.00 4 106.00 5 103.00 6 80.50 The information will display in the monitor as follow : ROCK USER JAZZ POP CLASSIC Rear View Camera When connecting the rear view camera the mirror image of the rear view is automatically displayed on the monitor when you change the gear to the back position. (Note: additional monitor can not display the image.) EXTERNAL AUDIO SOURCE On the front panel of the unit , there is an AUX IN jack, to connect analogue replay devices. Use this jack to replay sound of other replay equipment such as Digital Video players, computers, etc. Via the loudspeakers. 1). Please following the diagram below, connect the external device with stereo jack plug the AUX IN socket . 2). Press the MOD button to select the AUX IN connection. 3). Use the buttons on the external device itself to operate it . It depends on your habit to select the Audio mode . AUX IN Reset Factory Settings RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. AUX IN Headphones port RESET The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display. -16-