Pyle PLTTB1 PLTTB1 Manual 1 - Page 8
PLTTB-1, Setting, Antiskating, Control, Installing, Cover
View all Pyle PLTTB1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PYLE PRO PLTTB-1 Stereo Turntable Setting the Antiskating Control: CANN a a The antiskating control (7) must be set to match the setting of the counterweight (6). Rotate the antiskating control from the "0" position to match the counterweight (in this case, "2"). The number on the left edge of the control (when the turntable is viewed from above) is the value of the control's setting. Installing the Dust Cover: NOTE: Your turntable may already have the dust cover installed. If not, follow the installation instructions below. L Remove the dust cover hinges from the packaging. Attach the hinges to the dust cover by sliding them securely into place. Attach the dust cover to the turntable by inserting the exposed ends of the hinges into the mounts on the back of the turntable base. The dust cover may be remove for convenience (such as during disco-style usage) but should always be replaced when the turntable is not in use. 7