Pyle PMSA126BU Instruction Manual - Page 5

Microphon E 1 Volume Knob

Get Pyle PMSA126BU PDF manuals and user guides View all Pyle PMSA126BU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

SINGLE - Repeat the track that was current playing. C. PREV BUTTON: Use this button to select each of function depending on these three di erent modes as below. • In USB/SD mode, use to select previous track. • In FM/Wireless BT mode, use to select previous channel. • In FM/Wireless BT mode, hold this button will decrease the volume. D. NEXT BUTTON: Use this button to select each of function depending on these three di erent modes as below. • In USB/SD mode, use to select next track or folder,. • In FM/Wireless BT mode, use to select next channel. • In FM/Wireless BT mode, hold this button will increase the volume. E. PLAY/PAUSE BUTTON: Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play in the USB/SD mode or Wireless BT mode. • Presses the PLAY/PAUSE BUTTON one time to auto scan all frequencies from 87.5MHz to 108MHz in FM mode, the unit will auto store the channel. 6. LEVEL LED: The rst LED in the left is the power indicator. It will light on when the unit is on. Other LED Lights are for level indicators. 7. AUX INPUT: Connects to a MP3 player or Ipod with 3.5mm Jack. 8. SIRENA: Press this button to alarm if there is any emergency situation. 9. MP3 PLAYER VOLUME CONTROL: Turn this knob to adjust the volume of AUX input sources. 10. MICROPHONE 2 VOLUME KNOB: Turn this knob to adjust the volume of MIC2. 11. MICROPHON E 1 VOLUME KNOB: Turn this knob to adjust the volume of MIC1 12. MICROPHONE INPUT 2 JACK: MIC 2 Input Jack for connecting an unbalanced low impedance microphone with 1/4" TRS plug. 13. MICROPHONE INPUT 1 JACK: MIC 1 Input Jack for connecting an unbalanced low impedance microphone with 1/4" TRS plug. 14. LOW TONE CONTROL: Turn this knob to adjust the bass of the corresponding output signals. 15. HIGH TONE CONTROL: Turn this knob to adjust the treble of the corresponding output signals. 16. AUX1/2 VOLUME KNOB: Turn this knob to adjust the AUX1/2 output signal level 17. FM ANTENNA CONNECTOR: Connect for FM antennas. 18. AUDIO INPUT: Connect the audio input RCA jacks of other devices, to these RCA jacks 19. SPEAKER TERMINALS: Com/4-ohm/8-ohm/16-ohm/70V/100V, To Connect speaker wires to the selected terminals. www.PyleUSA.com 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
www.PyleUSA.com
5
SINGLE -
Repeat the track that was current playing.
C. PREV BUTTON:
Use this button to select each of function depending on these
three different modes as below.
•
In USB/SD mode, use to select previous track.
•
In FM/Wireless BT mode, use to select previous channel.
•
In FM/Wireless BT mode, hold this button will decrease the volume.
D.
NEXT BUTTON:
Use this button to select each of function depending on these
three different modes as below.
•
In USB/SD mode, use to select next track or folder,.
•
In FM/Wireless BT mode, use to select next channel.
•
In FM/Wireless BT mode, hold this button will increase the volume.
E. PLAY/PAUSE BUTTON:
Each press of the
PLAY/PAUSE BUTTON
causes the
operation to change from play to pause or from pause to play in the USB/SD
mode or Wireless BT mode.
•
Presses the PLAY/PAUSE BUTTON one time to auto scan all frequencies from
87.5MHz to 108MHz in FM mode, the unit will auto store the channel.
6. LEVEL LED:
The first LED in the left is the power indicator. It will light on when the
unit is on. Other LED Lights are for level indicators.
7. AUX INPUT:
Connects to a MP3 player or Ipod with 3.5mm Jack.
8. SIRENA:
Press this button to alarm if there is any emergency situation.
9. MP3 PLAYER VOLUME CONTROL:
Turn this knob to adjust the volume of AUX
input sources.
10. MICROPHONE 2 VOLUME KNOB:
Turn this knob to adjust the volume of MIC2.
11. MICROPHON E 1 VOLUME KNOB:
Turn this knob to adjust the volume of MIC1
12. MICROPHONE INPUT 2 JACK:
MIC 2 Input Jack for connecting an unbalanced
low impedance microphone with 1/4” TRS plug.
13. MICROPHONE INPUT 1 JACK:
MIC 1 Input Jack for connecting an unbalanced
low impedance microphone with 1/4”
TRS plug.
14. LOW TONE CONTROL:
Turn this knob to adjust the bass of the corresponding
output signals.
15. HIGH TONE CONTROL:
Turn this knob to adjust the treble of the corresponding
output signals.
16. AUX1/2 VOLUME KNOB:
Turn this knob to adjust the AUX1/2 output signal
level
17. FM ANTENNA CONNECTOR:
Connect for FM antennas.
18. AUDIO INPUT:
Connect the audio input RCA jacks of other devices, to these RCA
jacks
19. SPEAKER TERMINALS:
Com/4-ohm/8-ohm/16-ohm/70V/100V, To Connect
speaker wires to the selected terminals.