Pyle PPHP1299AI PPHP1299AI Manual 1 - Page 2
Before using your new Speaker System Please review the, following instructions, for the safety - reviews
View all Pyle PPHP1299AI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Before using your new Speaker System Please review the following instructions, for the safety and investment. INSTRUCTIONS Before connecting the speaker, make sure the system is off and the controls on the minimum level. On the contrary the system could damage 1. - Plug the power cable to the AC outlet and to the system and to the speaker 2. - Plug the Microphone in the "MIC" input 3.- Connect (CD, DECK, MP3, DVD, etc) on "LINE IN" input 4.- Turn on the systems. A green LED will light up to indicate the speaker is on 5.- Set the volume on the low level on the MIC and the LINE IN input 6.- Increase the master volume (place on the right side of LINE OUT* connector) 7.- Set TREBLE and BASS controls to equalize the sound. 8.- A red LED will light up when the system detects overload power. You will must decrease the volume. CAUTIONS Do not place the microphone against the speaker, it can cause feedback echo and it will damage the system EXTRA FUNCTIONS 6.3 and canon connectors marked as LINE OUT can handle an amplifier or even another powered speaker cabinet ,in cascade. On the bottom of the speaker there is a hole to place a stand. 1