Pyle PPHP2835B Instruction Manual - Page 3

REMOTE CONTROL FUNCTIONS 1. Power: Used to turn on and o the MP3 player power 2. MODE: Used to switch the AUX/ USB/Wireless BT/Radio 3. Mute button 4. Play/Stop button 5. Next song on USB 6. Previous song on USB 7. EQ solution 8. Increase volume 9. Choose song number directly 10. Choose USB signal directly 11. Decrease volume 12. Repeat song 2 11 3 4 5 6 7 8 11 9 10 12 4 www.PyleUSA.com TWS FUNCTION For increase sound e ect, our unit provides TWS function as follows: Step-1: Turn ON BT mode on your device and connect the machine. Step-2: Press and hold each control board "TWS" button more than 3's, and you will see "ON" on display, unit will start to connect the other unit automatically, now you can enjoy stereo sound, and adjusting one unit volume will a ect the other unit. Remark: 1. After connection, press and hold again one of control board "TWS" button more than 3's, you will see "OFF" on display, unit's TWS dis-connection. TROUBLESHOOTING Fault Possible Cause No sound 1. No input sound source. 2. Volume is too low. Solution 1. Use a better music signal. 2. Adjust volume. Distortion 1. Volume too high. of sound 2. Speaker may be damaged 1. Turn down the volume. 2. If speaker is damaged, repair or replace it. Karaoke does not work 1. Microphone plug is not fully inserted. 2. Microphone switch is not on. 3. Microphone volume knob is at the lowest position. 1. Plug microphone properly into the socket. 2. Turn on microphone switch. 3. Adjust microphone volume properly. MP3 does not play 1. The audio format in the U disc is incorrect. 2. Improper operation has caused a process disorder. 3. USB disc is disconnected. 1. Convert audio format into Mp3 format. 2. Reboot the machine. 3. Insert USB disc properly. www.PyleUSA.com 5