Pyle PPHP803MU PPHP123MU Manual 1 - Page 4

SPECIFICATIONS: Woofer Impedance Sensitivity Freq.Resp Diameter Coil Diameter Magnet Tweeter Impedance Sensitivity Freq.Resp Coil Diameter Magnet Built-in Amplifier PPHP803MU PPHP103MU PPHP123MU 4ohms 93dB/m/w 40Hz-20KHz 8" 1.5" 30oz 4ohms 94dB/m/w 40Hz-20KHz 10" 2" 40oz 4ohms 95dB/m/w 30Hz-22KHz 12" 2.5" 50oz 8ohms 8ohms 8ohms 100dB/m/w 100dB/m/w 100dB/m/w 800Hz-20KHz 800Hz-20KHz 800Hz-20KHz 1" 1" 1.34" 12oz 12oz 13.5oz Yes Yes Yes PPHP153MU 4ohms 97dB/m/w 30Hz-22KHz 15" 3" 60oz 8ohms 100dB/m/w 800Hz-20KHz 1.75" 23oz Yes Electrical safety All products are fitted with a detachable power cord (supplied) which connects to the AC mains and the back panel of the loudspeaker. The power cord has an IEC female connector on one end and male mains connectors on the other end. This cord is supplied specially to accommodate the different worldwide safety and electrical code requirements. The power cord supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding plug. Like any electrical appliance, your EON powered speakers should not be used in water or when wet. Product design and specifications are subject to change without previous notice.