Pyle PPRE70BT User Manual - Page 3

Control & Layout: 1. POWER SWITCH 2. 3.5MM INPUT 1 3. Headphone output 4. XLR MIC INPUT 5. LEVEL CONTROL 6. BASS 7. MID 8. TREBLE 9. BALANCE 10. MASTER VOLUME 11. USB DISPLAY SCREEN 12. USD SLOT / SD CARD SLOT 13. TAPE MONITOR 14. INPUT SELECTOR 15. MP3 CONTROL BUTTON PART Press to switch the power unit ON or OFF. To connect with other music sources with 3.5mm Jack To connect with headphones 1/4" /XLR combo jack for microphone For microphone level controls Adjusts the bass frequency of main output Adjusts the mid frequency of main output Adjusts the high frequency of main output Adjusts the balance of main output Adjusts the master volume of main output To show the name of the songs from USB, song time USB slot capacity is up to 32G Press this button to use 'TAPE input/output from rear panel sources only. To choose different input sources --MODE Press to select the USB/SD/FM/BT/Recording mode. The unit is set in MP3 mode and only when you press "MODE" button to go to other mode. --REPEAT There are 3 types of Repeat and they will show on the screen, and you can press this button to select the favorable repeat type, such as SINGLE / REPEAT / RANDOM / ALL REPEAT. Press this button for more than 3 seconds, it will go to Folder searching function, press Prev/Next buttons to go to the previous folder or the next folder. Press REPEAT button again to exit FOLDER searching. --PLAY Press to start to play the tracks. When in RECORDING MODE，press this button to start recording. --PREVIOUS TRACK Press to play the previous track from USB or SD card. When in FM mode, it is for previous station. --NEXT TRACK Press to play the next track. When in FM mode, it is for next station. www.PyleUSA.com