Pyle PRJSD188 PRJSD188 Manual 1 - Page 13

If the projector is the new one please read projector install chapter placed the projector connect the powerwire and the signelwire the operation as follow: Open operation 1.Before use the remoter . Put in two 7 size battery in it 2. Open the power switch on the backboard the power light begin to flash press the power key on the remote control or panel the indicator light turn light Power After 2 second the projector lamp begin work began appear unclear white light on the screen after 2 minute,the projector begin work 5. For the new projector. When the frist time to use maybe will appear image unclear or trapezoid distortion please read image adjustment chapter 6. After the image is clear then you can watch program during watching you also can setup the system parameter please read menu setting chapter Close operation 1.During use the projector press power key can let the projector switch to stay situation 2.After inter into stay situation the projector under auto protect auto release hot the indicator light is flase situation but here the projector is under auto protect situation not accept any order if need to startup again must wait for finished the release hot . DVD menu operation setting Language setup: When you choose the language setup ,the screen will display as following LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG OSD LANGUAGE set up the menu words AUDIO langset up the disc language SUBTITLE LANG set up the disc display words MENU LANG set up the disc menu display words Note : B,C,D is relation with the disc that you play ,if can not set .your disc no this function 16