Pyle PSUFM1043BT Instruction Manual - Page 4

TROUBLESHOOTING, Features, Technical Specs

Page 4 highlights

TROUBLESHOOTING Try the troubleshooting steps below if you are having problems while using your speaker. If problems still exist, please look for a quali ed technician or contact our company. To prevent electric shock or expand the scope of the malfunction, do not repair by yourself. SYMPTOM POSSIBLE PROBLEM SOLUTION No function light and No sound 1. Plug is not well connected 1. Insert the plug into electrical 2. Speaker power button is outlet. not turned on. 2. Turn on the power button Function light is turned on but no sound 1. Cable misconnected 1. Turn o the power, check the input jack to ensure proper audio signal is connected to 2. Speaker are not connected relevant input jack or misconnected 2. Power o , then check and 3. Audio signal is not transmitted to speaker con m the cable connection again. 3. Check all the speaker if there is audio signal output Remote control does not work 1. Before you press any function button, rst select the correct source with the remote control instead of the main unit 2. Reduce the distance between the remote control and unit 3. Insert the battery with its polarities (+/-signs) aligned as indicated 4. Replace the battery 5. Aim the remote controldirectly at the sensor on the front of the unit. If the problem exists after checking related procedures above, please refer to the appointed service ... Do not attempt to open the cover, otherwise we assumes no responsibility Features: • All-in-One Karaoke Entertainment System • High-Powered Active Speaker Tower • Multi-Colored DJ Flashing LED Lights • Bluetooth Wireless Music Streaming • USB Flash & SD Memory Card Readers • Digital Audio File Support • Includes Wireless Handheld Microphone • FM Radio with Auto Station Scan • (2) 1/4'' Microphone Inputs • RCA (L/R) & Aux (3.5mm) Inputs • Connect & Stream Audio from External Devices • Convenient Carry Handles & Detachable Rolling Wheels • Treble, Bass, Echo, Volume Controls • DJ Party Lights ON/OFF Switch Technical Specs: • MAX Power Output: 2000 Watt • Sound System: Dual 10'' Woofers, Dual 3'' Tweeters • Frequency Response: 45Hz-20kHz • Sensitivity (1w/1m): 92dB • Impedance: 4 ohm • Maximum SPL: 128dB • Dispersion (@6dB): H90°X V50° • Crossover: 3 KHZ • Power Supply: 110/220V • Microphone Battery Operated: Requires (2) x 'AA' Batteries, Not Included • Maximum USB Flash / SD Memory Card Support: 32GB • Dimensions: 16.1'' x 15.1'' x 42.0'' -inches 6 www.PyleUSA.com www.PyleUSA.com 7

  • 1
  • 2
  • 3
  • 4

www.PyleUSA.com
6
www.PyleUSA.com
7
TROUBLESHOOTING
Try the troubleshooting steps below if you are having problems while using your
speaker. If problems still exist, please look for a qualified technician or contact our
company. To prevent electric shock or expand the scope of the malfunction, do
not repair by yourself.
Features:
All-in-One Karaoke Entertainment System
High-Powered Active Speaker Tower
Multi-Colored DJ Flashing LED Lights
Bluetooth Wireless Music Streaming
USB Flash & SD Memory Card Readers
Digital Audio File Support
Includes Wireless Handheld Microphone
FM Radio with Auto Station Scan
(2) 1/4'' Microphone Inputs
RCA (L/R) & Aux (3.5mm) Inputs
Connect & Stream Audio from External Devices
Convenient Carry Handles & Detachable Rolling Wheels
Treble, Bass, Echo, Volume Controls
DJ Party Lights ON/OFF Switch
Technical Specs:
MAX Power Output: 2000 Watt
Sound System: Dual 10'' Woofers, Dual 3'' Tweeters
Frequency Response: 45Hz-20kHz
Sensitivity (1w/1m): 92dB
Impedance: 4 ohm
Maximum SPL: 128dB
Dispersion (@6dB): H90°X V50°
Crossover: 3 KHZ
Power Supply: 110/220V
Microphone Battery Operated: Requires (2) x 'AA' Batteries, Not Included
Maximum USB Flash / SD Memory Card Support: 32GB
Dimensions: 16.1'' x 15.1'' x 42.0'' -inches
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
No function light
and No sound
1. Plug is not well connected
2. Speaker power button is
not turned on.
1. Insert the plug into electrical
outlet.
2. Turn on the power button
Function light is
turned on but no
sound
1. Cable misconnected
2. Speaker are not connected
or misconnected
3. Audio signal is not trans-
mitted to speaker
1. Turn off the power, check the
input jack to ensure proper
audio signal is connected to
relevant input jack
2. Power off, then check and
confim the cable connection
again.
3. Check all the speaker if there
is audio signal output
Remote control
does not work
1. Before you press any function button, first select the correct
source with the remote control instead of the main unit
2. Reduce the distance between the remote control and unit
3. Insert the battery with its polarities (+/-signs) aligned as
indicated
4. Replace the battery
5. Aim the remote controldirectly at the sensor on the front
of the unit.
If the problem exists after checking related procedures above, please refer to
the appointed service ... Do not attempt to open the cover, otherwise we
assumes no responsibility