Pyle PT730U Owners Manual - Page 4

10. SIREN FUNCTION (WITH TWO EFFECTS) Siren on/off button switch and siren volume control 11. POWER ON/OFF SWITCH This is heavy-duty and rocker-type switch turns on the power to the amplifier. When the unit is turned on, there is a three-second delay, which reduces/eliminates the turn on transients associated with the system equipment connected to the amplifier and protects loudspeaker. This switch makes up that one pole be cut off when power is off. 12. OUTPUT LEVEL INDICATOR AND POWER ON INDICATOR This indicates the main output signal level relative to the related power output which is marked as 0dB 13. SPEAKER /ZONE SELECTOR These switches are used to select output to any combination of up to four individual speakers at 100V status. 14. AUX-IN 3.5MM AUDIO INPUT IPHONE/ MP3/SMART PHONE connect to the jack. 15. MP3 PLAYER+ USB/SD SECTION 1 2 USB SD 3 4 5 6 7 10 9 8 1.USB input terminal 2.SD input terminal 3.LCD display This luxurious LCD display the MP3 function playing status and with ID3 TAG function showing music song's title and lyrics. 4.REMOTE SENSOR WINDOW 5.VOL+ & VOL- button Increase or decrease the music volume. 6.PREVIOUS/ NEXT button Push shortly to skip the former or next song. 7.REC/PLAY button Button switch between recording and playing model 8.MODE button Switch selection for USB or SD player when both the USB card and SD card are available at the same time. 9.REPEAT button Marks the start point A when being pressed once and then marks the end point B when being pressed again. The system then repeats from A to B. If a number is already present, pressing the key will add 0 to the end. 1 0 .P L AY / PA U S E Push it to play or push again to pause. 25 16 17 18 POWER SELECT -115V 60Hz/-230V 50Hz ZONE ZONE ZONE ZONE 1 2 3 4 w w w. p y l e a u d i o . c o m 24 23 22 21 20 19 16. AUX-2 INPUT JACK (LIKE TUNER,CD, AUX INPUT) It can be used as an extra stereo input for a stereo source such as a tape deck, CD player, or Tuner, etc. 17. MIC 2, 3, 4, UNBALANCED INPUT JACK Unbalanced 6.35mm input jack, and can be used as the normal dynamic MIC input. 18. AUX-1 INPUT JACK It can be used as an extra stereo input for a stereo source, too. 19. AUX-1/ MIC-5 SWITCH 20.MIC1,2,3,4,5, BALANCED INPUT JACK Input MIC1-5 jacks are utilized to connect various external sound source devices including MIC, CD, Tuner, etc. MIC: it can be used as the normal dynamic MIC input. PHANTOM: it can be used as the condenser MIC input and DC 48V is supplied to the input terminal. 21.PHANTOM POWER ON/OFF SWITCH 22.PREAMP OUT REC/LINE RCA STEREO OUTPUT JACK 23.SPEAKER PUSH- TERMINAL CONNECTORS This terminal is for speaker wire connection, and connect the speaker whose combined impedance is equal to or higher than the rated output impedance, as shown below: PT730U 24.5V/4Ω 35V/8Ω 70V/33Ω 1 0 0 V / 6 7Ω PT930U 35V/ 4Ω 4 9 V / 8Ω 70V/17Ω 100V/34Ω 24. AC INLET/FUSE HOLDER 25. POWER SELECT 115V/60Hz and 230V/50Hz switch 6