Pyle PWMA3003T PWMA1003T Manual 1 - Page 5

AM ANTENNA FM ANTENNA 2 WIRELESS MICS WIRELESS ANTENNA 2 MIC INPUTS IPOD or MP3 input WA RNIN G AUX CD/DVD CD Recorder Power Amp 2 Mono Sub Outputs Power Amp Preamp Out Power Amp Main Speakers 1. Make sure that all connections are properly connected and the main volume is set to minimum level before turning on the unit. 2. When more then one pair of speakers are used, (specially the main speaker output) make sure that the speakers used are of the same wattage and impedance, otherwise the unit maybe damaged under high power or long term operation. 3. To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted. 4. For speaker cords, strip off the vinyl coating and twist the wire tip. Push down the pink jack or loosen the screw terminal, before inserting the wire tip, then fasten it and tighten the screw. Be careful not to let the wires stick out of the terminal otherwise this may cause a short circuit when wires of different terminal contact each other. 5. After the unit is turned on, adjust the main volume to the desired level same is true with the bass and treble volume, etc. 7 8 PDF created with pdfFactory trial version www.pdffactory.com