Pyle SLISAU10BK Instruction Manual - Page 5

HOW TO ASSEMBLE Keep away from sharp objects that may damage the unit when handling the set up or closing down the sauna equipment. 1. Unfold both side-walls off the FIR Sauna box to let it stand upright. 2. Close the zipper from the bottom of the back-wall to the front end. Place the foam floor cushion. 3. Place the wired foot pad, with its footprint facing upward on the foam floor cushion. The bottom and top cross bars can now be inserted to the connectors on the opposite side of the opening. These are used to support the shape of the sauna, and when entering/exiting you just simply remove the top bar and then place it back after entering/exiting 4. Put the folding chair on the rear part of the cushion so that the wired foot pad is directly in front of the chair where your feet will naturally go. The unit is ready for use. -7www.PyleUSA.com INSTALLATION PROCEDURES 1. To open the Sauna Box, put the PE-foam on the bottom and lay the folding chair in the housing. Build the Sauna Box inside the wall to keep it standing. -8www.PyleUSA.com