RCA 25211 User Guide - Page 11

INSTALLING THE PHONE Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Nickel-metal Hydride (Ni-MH) battery model T-T104 (GP, 2.4V, 550mAh), which is compatible with this unit. Risk of explosion if battery is replaced by an Incorrect type. Dispose of used batteries according to the instructions. 1. Locate battery which is packaged inside a plastic bag and is separate from the handset. 2. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the jack inside the compartment. NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. 4. Insert the battery pack. 5. Close the battery compartment by placing the handset back cover slightly higher than the handset and then sliding the cover down into position. INSTALLING THE HEADSET BATTERY NOTE: You must connect the headset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Telefield NA Inc. approved Li-Polymer battery Model T-T101 (A.E., 3.7V, 240mAh), which is compatible with this unit. Risk of explosion if battery is replaced by an Incorrect type. Dispose of used batteries according to the instructions. 11