RCA ANT2000 Owner/User Manual: ANT2000 - Page 3

English Getting Started Coaxial Cable Installation Precautions • Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause shorts and can change a cable's impedance. • Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds during installation. After installation, make sure there is no tension on the cable. • Use only round-headed staples. Any clamps or securing devices used with coax should grip the cable evenly about the circumference without crushing the cable. Flat staples can damage the coaxial cable. • Do not expose a coaxial cable to a temperature greater than 176 degrees Fahrenheit. Keep the cable away from heating vents and water heaters. Set up your Converter Box to work with the Smart Antenna. 1. Once you've followed the connection instructions for the Smart Antenna, turn your converter box on. 2. Follow the instructions in your converter box's owner's manual to set its antenna type to "Smart Antenna". Specifications Smart Antenna Frequency 470-806 MHz Gain 10 dB Directionality 360º Impedance 75 Ohms (F-type) Polarization Horizontal Power Consumption 12V DC Smart Module Frequency 470-806 MHz Impedance 75 Ohms (F-type) Antenna Control Jack Modular antenna control connector (CEA909)