RCA BRC3108 BRC3108 Product Manual - Page 11

Connections A. Connecting to a TV 1. Using the supplied AV cable If your TV has Audio/Video inputs, you can connect the player to your TV using the supplied AV cable. 2. Using a HDMI cable (not included) For TVs that support it, HDMI can provide the best quality audio and video output (depending on media source), and so is the preferred connection type. The HDMI cable incorporates both audio and video signals, so you will have just one cable running from the unit to your TV. Using a HDMI cable (not included), connect the HDMI OUT jack on your unit to the HDMI IN jack on your TV or HDMI-compatible display. • Configure the Video Setup options (found in the SETUP menu) to best match the capabilities of your TV. • Set the HDMI resolution to match the capabilities of your TV. This setting is also in the Video Setup section of the SETUP menu. Note: this setting can be selected only when the HDMI cable is connected to a TV. Note: • Refer to your TV owner's manual as well. • When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. B. Connecting an Audio Receiver This player will down-mix Dolby Digital or DTS multichannel audio to stereo audio for playback on the player's internal speakers or for output to a connected amplifier. Listening on External Audio Equipment 1. Connect the player to the left/right Audio In jacks on the other equipment using the included AV cable. 2. Turn on your audio equipment and follow the instructions provided with it to select the AUDIO IN function. Note: • Make sure to use the correct cable. Connecting the plugs incorrectly may cause lack of signal, or weak signal. 7