RCA EZ200 Quick Start - EZ200 - Page 1

v3.0 (EN)(US) QuickStartGuide EZ200 RCA Small Wonder Camcorder www.mysmallwonder.com Congratulations on purchasing your new RCA Small Wonder Camcorder. Please read these instructions for quick tips on using the product. Getting started Battery installation 1. Push (to the right) and hold the front cover lock at the bottom of the camcorder. 2. Slide the front cover down and then lift up to open. 3. Replace or install 2 AA batteries. • Make sure you align the battery polarities as indicated. • In the case of low battery, a low battery icon ( ) will flash on the screen. Please change batteries when battery icon is flashing. • Alkaline batteries are recommended for best results under normal use. For extended video shooting, Energizer e2 Lithium AA batteries are recommended. 4. Replace the front cover and slide up to lock. 3 2 4 1 Important battery information • Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly, or if all batteries are not replaced at the same time. • Any battery may leak electrolyte or explode if disposed of in fire or an attempt is made to charge a battery not intended to be recharged. • Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury. When discarding batteries, be sure to dispose of them in the proper manner, according to your state/provincial and local regulations. Setting date and time 1. Press or to shift among month, date, hour and minute and press + or - to set the date/time values. 2. Press or to select DONE and then press the red RECORD button to save settings. Or press DELETE to exit without saving. • Date and time setting can be accessed by pressing and holding PLAY/PAUSE and ON/OFF together while the camcorder is turned off. microSD memory card • A microSD memory card is included and already inserted in the camcorder. It is installed between the batteries in the front compartment. • To remove card, push card in until a click is heard and the card will pop out slightly, then remove the card. • To insert card, align card with Card Symbol on camcorder and slide in until a click is heard. The card icon ( ) appears on the screen with memory card inserted. microSD card Using your camcorder Turn on/off 1. Press ON/OFF to turn on. 2. Press and hold ON/OFF to turn off. • Camcorder will automatically turn off after 2 minutes if not in use. Record Press and release the red RECORD button (after "READY" appears on the screen) to begin recording. While recording: • A red and the elapsed time appears at the top left corner of the screen. • The red recording light on the camcorder front turns on. Pausing a recording: • Press PLAY/PAUSE. • A pause indicator II replaces the red at the top left corner and "Recording Paused" flashes in the middle of the screen. • To resume recording, press and release PLAY/ PAUSE again. Stop While playing or recording, press and release the red RECORD button to stop the playing or recording. Front compartment LCD screen For self recordings, the LCD screen can be rotated 180o. Back view Audio speaker Play 1. Press PLAY/PAUSE to start playback of the most recent recording or the selected video. To select another video, refer to Selecting videos. 2. Press and hold PLAY/PAUSE for three seconds to play all videos. • If no video is selected after playback has finished, recording mode will resume after 5 seconds. Search forward/backward: • Hold down to fast forward the selected video during playback. • Hold down to fast rewind the selected video during playback. Pausing video playback: • Press PLAY/PAUSE to pause playback (a pause indicator II and the remaining playback time flash at the top left corner of the screen). • Press PLAY/PAUSE again to resume playback. Selecting videos: • Press and release to cue the next video. • Press and release to cue the previous video. Delete 1. Press DELETE and the last recording and "DELETE VIDEO ?" appear on the screen. • To select another video, refer to Selecting videos. 2. Press and hold DELETE until the selected video is deleted. 3. To delete all videos, press & hold DELETE for 3 seconds and then repeat step 2. Take photo • Press and release WEB PHOTO to take photo (photo resolution: 640x480 pixel). Zoom Before or during recording: • Press + to zoom in. • Press - to zoom out. Volume During playback: • Press + to increase volume. • Press - to decrease volume. Microphone Recording indicator Lens Right view Front view Front cover Refer to Battery installation for more information. AV output Audio/Video output for connecting to TV or other AV equipment with the included AV cable. • Refer to "Viewing videos on TV" and "Recording videos to VHS tape or DVD" overleaf for more information. Bottom view Front cover lock Tripod screw mount Video quality selector HQ: High Quality mode webQ: Web quality mode • The selected setting (HQ or webQ) appears on the display screen during recording. • The HQ setting is recommended when planning to view video on a TV directly from the camcorder. Settings HQ webQ Quality BEST GOOD Approximate recording duration* 30 minutes 60 minutes Camcorder strap hole * Recording duration is based on 1 GB microSD card. Actual recording capacity depends on type of video content being recorded. USB Connector ARM Extending the USB Connector ARM: 1. Rotate the LCD screen 180o to show the USB Connector ARM. 2. Rotate the USB Connector ARM 180o to extend it. 3. Replace the LCD screen. • Refer to "Connecting to a PC" overleaf for more information. • Use USB Extension Cable (provided) if USB Connector ARM is obstructed or space does not permit connection to PC. • Reverse the steps above to retreat the ARM. 1 2 3 Left view