RCA RC5910P User Manual - Page 29
Program Playback
UPC - 034909920381
View all RCA RC5910P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Program Playback Program playback lets you set up a specific order for DVD playback. 1. With a disc inserted, but not playing, press PLAY MODE. "Reading disc information, please wait" appears on the screen. When the player is finished reading the discs, the PLAY MODE screen appears. Note: It's normal for the player to take a while to read the disc information. 2. On the screen, each disc is identified by it's type beside the slot number it occupies. Press DISC (several times if necessary) to highlight the first disc from which you want to select chapters to program. The selected disc's chapter numbers appear in the Chapter box. Note: If "- - -" is shown rather than a disc type, there is no disc in the slot. 3. Use the right and left arrow buttons to highlight the first chapter to add to the program and press OK. The selected chapter appears in the Program Order box. 4. Repeat Step 3 for each chapter to add to the program from the selected disc. Repeat Steps 2-4 to add chapters from other discs. Up to 20 chapters may be programmed at once. 5. Press PLAY to begin playing the program. Note: • To resume normal playback, press CLEAR and then press PLAY. Deleting Programmed Chapters • To remove the last chapter that was added to the program, press CLEAR. Each subsequent press of CLEAR deletes the next chapter in the opposite order the chapters were programmed. • To remove all of the chapters from the program, hold down CLEAR. • All programmed chapters are deleted when the disc is removed or the DVD player is turned off. Playing DVDs 27