RCA RCR311S User Guide - Page 5

To program the remote to control a VCR or DVD.

Get RCA RCR311S PDF manuals and user guides View all RCA RCR311S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 5 3. If you are programming the remote to control your TV, satellite receiver or cable box, go directly to step 5. 4. To program the remote to control a VCR or DVD. The VCR•DVD key can control only one component, either your VCR or your DVD. To program your remote to control either your DVD or your VCR, you must first put the remote in the proper programming mode. Follow these directions before proceeding to step 5. VCR•DVD ON•OFF a. Press and hold the VCR•DVD key. The illuminated ON•OFF key turns on. VCR•DVD b. While holding down the VCR•DVD key, press and release the number 2 key on the keypad to control a VCR or the number 3 key to control a DVD. The illuminated ON•OFF key turns off. VCR•DVD ON•OFF (BLINK) VCR•DVD TV SAT•CBL 5. ON•OFF c. Release the VCR•DVD key. The illuminated ON•OFF key blinks four times and then turns off. Your remote is now either in VCR or DVD Programming Mode, depending on which you chose. Proceed to step 5. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wish to program. The illuminated ON•OFF key turns on and remains on. (BLINK) ON•OFF ON•OFF (BLINK) 6. While holding the component key down, press and hold the ON•OFF key. The illuminated ON•OFF key turns off. 7. After holding both keys down for three seconds, the illuminated ON•OFF key turns back on. 8. Release both keys. The illuminated ON•OFF key remains on. 9. Refer to the Brand Codes in the enclosed Code Lists. Press and release the appropriate brand code key, using the number keys on the keypad. The illuminated ON•OFF key blinks once. ! TIP: Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control. ON•OFF ON•OFF (BLINK) 10. Press and release the ON•OFF key repeatedly until your component turns off. Wait 4 seconds between each key press. Each time you press the ON•OFF key, the illuminated ON•OFF key blinks, and the next code is sent. The Brand Code Search begins with the first code in the chosen brand list for that component and cycles through all the codes for that brand. If your component turns off, you have found the correct code. (If it cycles through and the illuminated ON•OFF key blinks four times and turns off, all codes in the chosen brand lists have been searched. The Brand Code Search mode is exited.) 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
!
3.
If you are programming the remote to control your TV,
satellite receiver or cable box, go directly to step 5.
4.
To program the remote to control a VCR or DVD.
The
VCR•DVD
key can control only one component, either your
VCR or your DVD. To program your remote to control either
your DVD or your VCR, you must first put the remote in
the proper programming mode. Follow these directions
before proceeding to step 5.
a.
Press and hold the
VCR•DVD
key. The illuminated
ON•OFF
key turns on.
b.
While holding down the
VCR•DVD
key, press and
release the number 2 key on the
keypad to control a VCR or the
number 3 key to control a DVD.
The illuminated
ON•OFF
key
turns off.
c.
Release the
VCR•DVD
key. The
illuminated
ON•OFF
key blinks
four times and then turns off.
Your remote is now either in
VCR or DVD Programming
Mode, depending on which
you chose. Proceed to step 5.
5.
Press and hold the component key
(
TV
,
VCR•DVD
,
SAT•CBL
) you
wish to program. The illuminated
ON•OFF
key turns on and
remains on.
6.
While holding the component key
down, press and hold the
ON•OFF
key. The illuminated
ON•OFF
key turns off.
7.
After holding both keys down for
three seconds, the illuminated
ON•OFF
key turns back on.
8.
Release both keys. The illuminated
ON•OFF
key remains on.
9.
Refer to the Brand Codes in the
enclosed Code Lists. Press and
release the appropriate brand code
key, using the number keys on the
keypad. The illuminated
ON•OFF
key blinks once.
TIP:
Throughout the programming
of each key, be sure to keep the remote
pointed at the IR sensor of the
component you are currently
programming the remote to control.
10.
Press and release the
ON•OFF
key
repeatedly until your component
turns off. Wait 4 seconds between
each key press. Each time you press
the
ON•OFF
key, the illuminated
ON•OFF
key blinks, and the next
code is sent. The Brand Code
Search begins with the first code in
the chosen brand list for that
component and cycles through all
the codes for that brand. If your
component turns off, you have
found the correct code. (If it cycles
through and the illuminated
ON•OFF
key blinks four times and
turns off, all codes in the chosen
brand lists have been searched. The
Brand Code Search mode is exited.)
VCR
•
DVD
VCR
•
DVD
ON
•
OFF
VCR
•
DVD
ON
•
OFF
SAT
•
CBL
VCR
•
DVD
TV
ON•OFF
(BLINK)
ON•OFF
(BLINK)
ON•OFF
(BLINK)
5
ON•OFF
ON•OFF
(BLINK)
RCR311S_NA_IB_REVB_K4.qxd
7/27/04
11:41 AM
Page 5